Insert bulb socket 1 into the
headlight housing.
Install the instrument panel as
described above.
Replacing turn indicator
bulbs, front and rear
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screw 1.
Pull the glass out of the re-
flector housing at the threaded-
fastener side.
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
8
85
z