BMW G 650 GS Sertao Rider's Manual page 79

Roll the front wheel forward to
remove.
Remove spacing bushings 4
and 5 from the wheel hub.
Installing front wheel
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Slip spacing bushings 5 and 4
onto the wheel hub.
with BMW Motorrad ABS
When installing the front wheel,
take care not to damage the
ABS sensor and the ABS line.
The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the forks, making
sure that the brake disc passes
between the brake pads.
OE
Raise the front wheel, insert
axle 3 and tighten to specified
torque.
Quick-release axle in
telescopic forks
45 Nm
Remove the front-wheel stand.
Apply the front brake and firmly
compress the front forks sev-
eral times
Tighten axle clamping screw 2
to the specified torque.
8
77
z