Table of Contents
Advertisement
As shown in Figure 7, make sure that the lamp attachment is coupled with the clasp
5
of the lamp unit
When replacing the lamp, please do not forget to remove the lamp attachment.
0
Attachment of the installation verification seal
After replacing the lamp, attach the "installation verification seal" on the lamp cover
1
Attach the installation verification seal at the bottom right of the lamp cover.
0
The installation verification seal states "DOWN45 ° - 90 °".
0
When the lamp attachment is removed, peel off the attached verification seal and keep it for further use.
0
Figure 7
Installation verification seal
49
Advertisement
Chapters
Table of Contents
