ViewSonic PJ658 User Manual page 9

Ports (See below.)
AUDIO IN3 L/R port
(In the default setting, the AU-
DIO IN3 L/R port is the audio
port for the VIDEO, S-VIDEO
and COMPONENT VIDEO
ports, however it is possible to
change the settings.)
COMPONENT
VIDEO ports
Y
C /P
B B
C /P
R R
VIDEO port
S-VIDEO port
AUDIO IN2 port
(In the default setting, the AUDIO
IN2 port is the audio port for the
RGB IN2 port, however, it is pos-
sible to change the settings.)
NOTE (*) About Restart switch: This projector is controlled by an internal
microprocessor. Under certain exceptional circumstances, the projector may not
operate correctly and the microprocessor will need to be reset. In such a case,
please push the Restart switch by using a cocktail stick or similar, and before
turning on again, make the projector cool down at least 10 minutes without
operating. Only push the Restart switch in these exceptional instances.
ViewSonic
Rear-Left side
AUDIO IN1 port
(In the default setting, the AUDIO IN1 port is the audio
port for the RGB IN1 port, however, it is possible to
change the settings.)
AUDIO IN3
Y R
C P
/
B B
L
AUDIO IN2
C P
/
R R
VIDEO
S-VIDEO
PJ658
RGB IN1 port
Restart switch (*)
RGB IN2 port
RGB IN1 RGB IN2
AUDIO IN1
CONTROL
K
CONTROL port
Kensington lock slot
Power switch
AC inlet
Elevator button
Elevator foot
Vent
RGB OUT port
RGB OUT AUDIO OUT
USB
Ports
USB port
Part names
AUDIO OUT port
5