Searching An Input Signal; Selecting An Aspect Ratio; Adjusting The Zoom And Focus - ViewSonic PJ658 User Manual

Searching an input signal

1.
Press the SEARCH button on the remote control.
The projector will start to check its input ports in order to
find any input signals.
When an input is found, the projector will stop searching and display the image.
If no signal is found, the projector will return to the state selected before the
operation.
RGB IN 1  RGB IN 2  COMPONENT VIDEO  S-VIDEO  VIDEO

Selecting an aspect ratio

1.
Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
 For an RGB signal
NORMAL  4:3  16:9  SMALL
 For a video signal, s-video signal or component video signal
4:3  16:9  14:9  SMALL
 For a no signal
4:3 (fixed)
● The NORMAL mode keeps the original aspect ratio of the signal.
● Performing the automatic adjustment initializes the aspect ratio setting.

Adjusting the zoom and focus

1.
Use the zoom ring to adjust the screen size.
2.
Use the focus ring to focus the picture.
Focus ring
Operating
Zoom ring