Frost And Storm Warnings; Mounting/Positioning - La Crosse Technology CA84688 Faqs

Wind speed weather station
Table of Contents

Advertisement

 Press any button to stop the alert sound.
 The alert icon will flash while value is in alert range.
Disarm Alert:
1. Hold the ALERTS button for 3 seconds to enter alert set mode.
2. Press and release ALERTS button until you see the alert you wish to disarm.
3. Press the + or - buttons to disarm the alert.
4. Press the WARNING button to exit.
1. Hold the WARNING button for 3 seconds to view frost and storm warnings.
2. Press and release the + or -/CH buttons to activate/deactivate frost and storm
warnings.
3. Press and release the WARNING button to confirm and move to the next item.
Note: The warning values are not programmable. You can only activate/deactivate the
frost or storm warning.
 This station offers the option of active Frost and Storm alerts.
 Simply activate the alerts to use them.
Note: When setting FROST alerts for channels two & three, user will select channel first (1,
2, 3) then select outdoor alert. FROST Alerts cannot be set for channel 2 & 3 if no
additional sensors are connected.
Frost Warning:
 When the outdoor temperature is between: 28 °F to 37 °F (-2 °C to 3 °C), and the frost
warning is active a Frost Warning will alert you with a flashing snowflake icon and the
station will sound.
 Outside of this range, the frost warning is not active.
 Weather station will beep five times each minute, for 5 minutes. After 5 minutes, the
warning icon will flash until frost warning is out of range.
Storm Warning:
 When the barometric pressure drops more than 2.5hPa in a 3 hours period, the storm
warning will flash and the station will sound.
 The storm warning icon (alert triangle) will flash storm and storm icons (clouds, rain,
lightning) will flash and sound for 1 minute.
 After 1 minute, the warning icon will flash for a period of 1 hour.
 Press any button to stop the sound. Storm warning icon will still flash.
First, set everything up in the house to be sure it works before mounting the sensors outside.
TX141Wv2 sensor:
La Crosse Technology, Ltd.

FROST AND STORM WARNINGS

MOUNTING/POSITIONING

Page 8

Advertisement

Table of Contents
loading

Table of Contents