Adjusting Sound Volume; Using Front Panel/Remote Control; Using Mute - ViewSonic VPW505 User Manual

Adjusting Sound Volume

Using Front Panel or Remote Control
1. To turn up sound volume, press VOLUME + on
either the front panel of display or on the remote
control.
2. To turn down sound volume, press VOLUME - on
either the front panel of display or on the remote
control.

Using MUTE

1. If you would like to silence the volume on a tem-
porary basis, simply press the MUTE key to
silence the volume.
2. When the display's volume is muted, the display
will display "MUTE" on the upper right corner of
the screen.
3. To disengage the mute mode, simply press the
MUTE key or the VOLUME +/- button again.
Notes:
If the display's built-in speakers are turned off
using the OSD, then volume controls will not
affect volume generated by the built-in speaker.
Volume controls are valid when audio output is set
to "variable" (See page 19). If audio output is set
to "fixed", then volume control is not active.
MUTE
VOLUME +/-
ViewSonic VPW505 11