Adjusting Sound Volume; Changing Channels (Tv Mode Only) - ViewSonic VPW425 - 42" Plasma TV User Manual

Adjusting Sound Volume

Using Front Panel or Remote Control
1. To turn up sound volume, press VOLUME + on
either the front panel of monitor or on the remote
control.
2. To turn down sound volume, press VOLUME - on
either the front panel of monitor or on the remote
control.
Using MUTE
1. If you would like to silence the volume on a tem-
porary basis, simply press the MUTE key to
silence the volume.
2. When the monitor's volume is muted, the monitor
will display "MUTE" on the upper right corner of
the screen.
3. To disengage the mute mode, simply press the
MUTE key or the VOLUME +/- button again.
Notes:
If the monitor's built-in speakers are turned off
using the OSD, then volume controls will not
affect volume generated by the built-in speaker.
Volume controls are valid when audio output is set
to "variable" (See page 22). If audio output is set
to "fixed", then volume control is not active.
Changing Channels
(TV Mode Only)
Using Remote Control
1. Switch input to TV mode.
2. The monitor will now display the current channel
on the upper right corner of screen.
3. To change channels, press either CHANNEL +/-
button or number keypad on the remote control.
Using Front Panel & OSD Menu
1. Switch input to TV mode.
2. Press the MENU +/- Key to display OSD
3. Press the ADJ + Key a few times until the TV
menu (see sample to the right) within the OSD is
displayed.
4. Press the MENU - Key once to scroll down to
"CHANNEL".
5. Press the ADJ +/- Key to adjust the TV channel.
Note:
TV mode is only available with TV Tuner
installed.
12 ViewSonic VPW425
MUTE
VOLUME +/-
CHANNEL +/-
MENU +/-
VOLUME +/-
(ADJ +/-)