Image Optimization files are also available free of charge at our web site. Go to www.viewsonic.com and select “Support.” If you do not have access to the internet or if you require further assistance, contact "Customer Support" on page 36.
Quick Start Guide(QSG) CD WIZARD Power Cable China VGA Cable Bateries Power Cable EU Power Cable UK Power Cable US S-VIDEO Cable RCA Component Cable RCA Video/Audio Cable Note: Only suitable power cable is provided for the country of destination. ViewSonic VPW425...
BBE ® Sound Maximizer RS232 Serial Connection Built-in BBE sound processor maximizes the The RS232 command set includes front panel sound quality. lock, input selectoin, power on/off, volume and other standard RS232 command controls. TV Tuner Feature Compatible with NTSC format. ViewSonic VPW425...
Screen Display is engaged. monitor is shut-off but the main power cord is plugged into the back of the unit. Solid Green - Power ON Rear View Video Connectors(without TV Tuner) Video Connectors(with TV Tuner) RGB / Computer Related ViewSonic VPW425...
Press OFF to send monitor into Standby mode. Press ON to power on from standby mode. (See Page 11) Direct Input Selection Keys WIDE Directly change input signal Toggles between various selection by pressing the aspect ratio settings. (See appropriate key. Page 17) ViewSonic VPW425...
“VIDEO 1” input on the back of monitor. 2. Connect the red (R) and white (L) audio jacks from the DVD to the R and L audio-in jacks located next to the “yellow” VIDEO 1 connector. ViewSonic VPW425...
2. Connect a RCA cable from the subwoofer output jack to the cies below 120Hz. The subwoofer external subwoofer. will use the same Fixed or Variable audio output setting as AUDIO OUT RCA jacks. The 3.5mm phono/earphone output level is always used for remote turn on/off applications. ViewSonic VPW425...
“16:9”. If the PC’s display resolution exceeds these maximums, the monitor will have to artificially eliminate dots in order to fit within the physical dot capability of the display; therefore, it is possible that the monitor may not be able to show details with adequate clarity. ViewSonic VPW425...
Selection Keys Notes: If TV tuner is not installed, TV option will not be available. Some of the Direct Input Selection keys will not be applicable for this monitor. For AV mode, use AV1. For S-Video, use AV2. ViewSonic VPW425...
(see sample to the right) within the OSD is (ADJ +/-) displayed. 4. Press the MENU - Key once to scroll down to “CHANNEL”. 5. Press the ADJ +/- Key to adjust the TV channel. Note: TV mode is only available with TV Tuner installed. ViewSonic VPW425...
Interlaced scanning is a method that creates a TV picture with alternating lines of information and is the cause for flickering. Progressive scanning is a method that creates a TV picture with consecutive lines of informa- tion that results in flicker-free picture quality. ViewSonic VPW425...
Page 16
This plasma monitor is compatible with digital TV. In order to receive digital television broadcasts, you will need to use a “HDTV decoder” or “HDTV set-top box” with component video output or RGB video output. Please consult your local sales representative prior to purchasing a HDTV decoder or HDTV set-top box. ViewSonic VPW425...
1. Once the PIP or POP mode is turned on, you can Please see page 16 for details. change the main picture’s input source by press- ing the INPUT SELECT key or any one of the DIRECT INPUT KEYS. ViewSonic VPW425...
Page 18
1. By default, the OSD will always display DISABLE. To swap the main (left) and sub (right) windows, use the ADJ +/- key to swith to ENABLE. Once the swap is complete, the OSD will return to display DISABLE. ViewSonic VPW425...
3. When using RGB or DVI inputs, only 4:3 and 16:9 modes are available. 4. Do not stay in 4:3 mode for an extended period, as this may cause a permanent after-image to remain on your screen. ViewSonic VPW425...
You can set the OSD menu’s background to transparent or with a blue background. Set to OFF if you want a transparent setting. Set to ON if you want a blue background. Note: To prevent permanent after-image, we strongly suggest to turn “OSD TIMEOUT” to ON. ViewSonic VPW425...
5. If you wish to turn the sleep timer OFF before it shuts itself off, sim- ply press the SLEEP TIMER key again and cycle through all the pre- set times until “SLEEP: OFF” is displayed. ViewSonic VPW425...
AIR. BACKGROUND / BACKGROUND COLOR Background setting eliminates the “snowflake” effect that results when a TV channel is not available by displaying a colored background. The BACKGROUND COLOR setting allows you to choose the color preference. ViewSonic VPW425...
3. You will now be prompted to enter a 4-digit passcode. Enter a 4-digit passcode using the keypad. 4. After setting the passcode, the channel is now locked and viewing is not possible unless the same passcode is entered. ViewSonic VPW425...
Sound Maximizer circuitry. Use SRS Surround Sound to simulate a surround sound effect if you are not using a multi-channel sound setup. Use the BBE Sound Maximizer when using the monitor to playback live performance related audio programs. ViewSonic VPW425...
“Parental Guide ACCOMPLISHED” for 5 seconds (see Figure 4). Or you can select LAST PAGE to go back to last setting. Note: When a TV program is blocked, a screen similar to Figure 5 is dis- played. ViewSonic VPW425...
“TV” OSD sub-menu. Repeat the above procedure to reset your passode. If you incorrectly enter “NEW PASSCODE” three times, the mon- itor will go back to the “Press NEW PASSCODE” step and request that you set the new passcode again. ViewSonic VPW425...
When using RGB mode, the OSD will display a mode number that references the table above. Modes 15, 16, 20, 21 under RGB mode is not available when using with DVI input. Modes 24-26 are for use with Apple Macintosh comput- ers. ViewSonic VPW425...
Use to change various digital zoom modes. See page 17 for more information. Notes: 1. Each of the (4) color temperature settings may not be exactly equal to the temperature setting as defined; however, it will be approximately close. ViewSonic VPW425...
Decrease to shift the picturn to the left. Notes: 1. Each of the (4) color temperature settings may not be exactly equal to the temperature setting as defined; however, it will be approximately close. ViewSonic VPW425...
Positive or Negative Amplitude RGB: 0.7Vp-p Frequency H: support to 31K~91KHz V: support to 50~85Hz DVI Signal Type Digital Polarity Positive or Negative Frequency H: support to 31K~68KHz V: support to 50~85Hz Audio Signal Analog 500mV rms /more than 22Kohm ViewSonic VPW425...
Page 31
75.03 135.00 1280(SXGA)x1024 85 91.15 85.02 157.50 720(DOS)x400 31.46 70.08 28.320 640(VGA)x480 31.5 25.175 1280(HDTV)x720P 60 45.15 74.250 1920(HDTV)x1080I 60(I) 33.75 74.250 640(VGA)x350 31.50 25.175 852(WGA)x480 31.72 60.41 30.00 * These modes are not supported in DVI mode. ViewSonic VPW425...
Page 33
Normal power Stand-by No pulse No pulse No video Power off Power saving Pulse No pulse blanked Less than 5 watts No pulse Pulse This Plasma display is Energy star compliant when used with a computer equipped with DPMS. ViewSonic VPW425...
(OPTIONAL) Package Content An optional wall-mount is available. Please contact your local retailer for more information. Left Wall Angle Right Wall Angle Horizontal Module Module Support Screws for Wall Screws for Fix Angle x 8 Mounting x 8 ViewSonic VPW425...
You can adjust the mounting direction and inclination angle (0, 5, 10, 15 degrees) by adjusting the screws position on the Wall Mounting Angle Module. ViewSonic VPW425...
Page 36
This type of equipment is to be installed by qualified installers, please contact with authouized dealer for installation. Please make sure that your wall is capable of supporting this wall mount and plasma monitor which can easily weigh over 120 kg (265 lbs.). ViewSonic VPW425...
(Examples of cause a permanent after-image to remain still pictures include logos, on the monitor. video games, computer images, and images displayed in 4:3 normal mode) ViewSonic VPW425...
(d) a description of the problem, and (e) the serial number of the product. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors. If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product. ViewSonic VPW425...
• Unit has been dropped or the cabinet has been damaged. • Unit exhibits a distinct change in performance, indicating a need for service. ViewSonic VPW425...
BBE is a registered trademark of BBE Sound Inc. SRS and symbol are trademarks of SRS Labs Inc. SRS technology is incorporated under license from SRS Labs, Inc. All other trademarks are the properties of theri respective owners. ViewSonic VPW425...
The device complies with the requirements of the EEC directive 89/336/EEC as amended by 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” User Information for All Countries NOTICE: Use the cables which are included with the Plasma Display or specified. ViewSonic VPW425...