M.2 Solid-State Drive Bracket - Lenovo ThinkCentre M90t User Manual

d. Remove the film that covers the thermal pad on the heat sink, if any. Then, install the M.2 solid-
state drive.
e. Install the heat sink with the M.2 solid-state drive.
f. Insert the stopper.
4. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.

M.2 solid-state drive bracket

Prerequisite
Before you start, read Appendix A "Important safety information" on page 85 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 42.
2. Remove the 2.5-inch primary storage drive cage. See "Primary storage drives" on page 47.
3. Remove the M.2 solid-state drive and heat sink. See "M.2 solid-state drive and heat sink" on page 56.
62
M90t User Guide