Table of Contents
Advertisement
7. Install the optical drive cage to the 3.5-inch secondary storage drive cage.
8. Install the optical drive cage to the chassis.
9. Connect the signal cable and the power cable to the 3.5-inch secondary storage drive.
10. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
Secondary storage drive
Prerequisite
Before you start, read Appendix A "Important safety information" on page 85 and print the following
instructions.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
.
Chapter 7
CRU replacement
65
- Quick Links:
- Features and Specifications
Hide quick links:
Advertisement
Table of Contents
