Table of Contents
Advertisement
Overview
The CCU-590/590P Camera Control Unit provides a
variety of remote control and adjustment functions for the
processing of signals from a BVP-E10/E10P/E10WS/
E10WSP/E30/E30P/E30WS/E30WSP CCD Color Video
Camera, and can be used in Electronic Field Production
(EFP) or studio work.
The CCU-590/590P has the following features:
Wide variety of system configurations
• The optional CA-905K/F/T/L large-lens adaptor allows
a large lens to be fitted onto the portable video camera
and used in conjunction with the BVF-77/77CE 7-inch
B/W Viewfinder.
• 3 output lines (composite video or SDI can be selected as
the output signal) are provided.
• When equipped with the optional RM-B750 Remote
Control Unit, the RM-B750 can be used to control the
video camera directly, without the use of a RCP-750/751
Remote Control Panel.
Note
The RM-B750 does not work when the CCU-590/590P is
connected to the CNU-700 Camera Network Unit.
• The CCU-590/590P supports communications between
the video camera and the CCU-590/590P over either a
triax cable or coaxial cable. (Power, however, is not
supplied to the video camera in the case of coaxial
cable.)
10-MHz, wideband triax transmission
• Wideband triax transmission with Y signal at 10 MHz,
R-Y and B-Y signals at 6 MHz is used for inputting
video signals from the video camera. Maximum length
of triax cable is 700 meters (with diameter of 8.5 mm),
1,050 meters (BELDEN 9232 with diameter of 13.2
mm), or 1,400 meters (with diameter of 14.5 mm).
• The CCU-590/590P supports prompter signal
transmission.
Rack mountable
Two CCU-590/590Ps can be mounted side by side in a
standard 19-inch EIA rack when using an optional RMM-
301 Rack Mount Adaptor.
5
Overview
Advertisement
Table of Contents
