2-1. Driving procedures
■
When the steering lock cannot be released
■
Steering lock motor overheating prevention
To prevent the steering lock motor from overheating, the motor may be sus-
pended if the engine is turned on and off repeatedly in a short period of time.
In this case, refrain from operating the engine. After about 10 seconds, the
steering lock motor will resume functioning.
■
If the keyless access with push button start indicator flashes in yellow
and a message is displayed on the multi-information display
The system may be malfunctioning. Have the vehicle inspected by any
authorized SUBARU dealer or repairer, or another duly qualified and
equipped professional immediately.
■
If the access key battery is depleted
→P. 384
■
If the keyless access with push button start system has been deacti-
vated in a customized setting
→P. 483
174
The keyless access with push button start
system indicator light (green) will flash
quickly and a message will be shown on
the multi-information display. (→P. 435)
Vehicles with an automatic transmis-
sion
Check that the select lever is set in P.
Press the push-button ignition switch
while turning the steering wheel left and
right.
Vehicles with a manual transmission
Press the push-button ignition switch
while turning the steering wheel left and
right.