DISASSEMBLY
1. Removal of the front cover and
back cover
1. Remove the two screws (a) as shown in Fig. 2-1-1.
2. Remove the six screws (b) as shown in Fig. 2-1-1.
3. Place the projector upside down as shown in Fig.
2-1-2.
4. Remove the six screws (a) as shown in Fig. 2-1-2.
5. Remove the front cover as shown in Fig. 2-1-2.
6. Remove the back cover as shown in Fig. 2-1-2.
Front cover
- 8 -
(b)
(a)
Fig. 2-1-1
(a)
Back cover
Fig. 2-1-2
(a)