Wired Connectivity - Bowers & Wilkins PX7 Manual

6. Wired Connectivity

In addition to Bluetooth, your Bowers & Wilkins headphones can also connect to audio sources using the
supplied 3.5mm audio or USB cables.
6.1 Connecting with the 3.5mm audio cable
The 3.5mm audio cable enables your headphones to be used with a device supporting analog sound output
such as a smartphone or tablet 3.5mm headphone socket, a traditional hi-fi system, or on board an aircraft.
1. Insert the 3.5mm audio cable into the headphone 3.5mm socket on the left ear piece.
2. Take the other end and insert into the appropriate socket on your device.
3. Your headphone will automatically disconnect from any Bluetooth devices.
Note: Your headphones must have sufficient charge and switched on to play audio from an analog source
device. The volume and play/pause buttons will not function when using the 3.5mm audio connection.
6.2 Connecting with the USB cable
USB connection enables your headphones to function as a USB sound output device when connected to a
capable computer.
1. Insert the USB-C end into the headphone's USB-C socket on the right ear piece.
2. Take the USB end and insert into the appropriate socket on your computer.
3. Your headphone will automatically disconnect from any Bluetooth devices.
4. Find and select your headphones from the computer's audio output control panel.
Note: When connected to an capable compter USB port, the headphone battery will also charge.
13