Bluetooth Connectivity - Bowers & Wilkins PX7 Manual

5. Bluetooth Connectivity

5.1 Pairing
Your Bowers & Wilkins PX 7 headphones are designed to stream music wirelessly from Bluetooth audio
devices, such as smartphones, tablets, or computers. To do so, the headphones & device must first be
paired.
1. The first time you switch on your headphones, Bluetooth pairing mode will be enabled, the
indicator will blink blue.
2. If pairing mode is not enabled, please slide & hold the power switch to the (BT Icon) position for 5
seconds, let go when the indicator blinks blue & when an audible cue is presented.
3. Ensure the Bluetooth feature is enabled on the device, your Bowers & Wilkins headphones will
appear in the discovery list, select it to start pairing.
4. The indicator will blink blue & red while pairing is in progress and will change to continuous blue &
an audible cue presented when successfully paired.
Your heapdhones can remember up to eight paired Bluetooth Devices. Repeat the above steps to pair
more devices.
10