Panasonic CQ-MR505N Service Manual page 44

Installation
E
N
G
L
I
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
S
hands and fingers.
H
¡We strongly recommend you to wear gloves for installation work to protect yourself from injuries.
26
Installation Procedures
Note: Disconnect the cable from the negative (–) battery terminal.
1. Secure the Mounting Collar q.
Insert Mounting Collar q into the dashboard, and bend the mounting tabs out with a screwdriver.
Dashboard
q Mounting Collar
2. Secure the rear of the unit.
a) Check the electrical connections by referring to this operating instructions.
b) Connect Mounting Bolt w, using a suitable wrench.
c) Insert Power Connector e to the unit.
d) Insert the unit into Mounting Collar q and push it in until a "click" is heard.
e Power Connector
Unit
e) Secure the rear of the unit to the car by either of the two recommended methods.
¡Using the Rear Support Strap (Option)
Affix one end of the Rear Support Strap to the rear of the unit, and the other end to the fire wall of
car, or some other metallic area.
36
(continued)
Tapping Screw (Option)
CQ-MR505/MR303N
Screwdriver
Unit
w Mounting Bolt
Fire Wall of Car
3 mmø
Hex. Nut (Option)
Rear Support Strap (Option)
wMounting Bolt
qMounting Collar
Mounting Tab
Make sure that the
lock lever is flush
with the mounting
collar (not project-
ing outward).
Lock Lever