Panasonic CQ-MR505N Service Manual page 29

For Seek Tuning, RDS Station Preset, Tuning in a RDS preset station, and Auto RDS
Station Preset, please refer to Radio Basics (pages 16 to 18).
Press and hold
EO N PT Y CT
8
RDS seek tuning (PI seek)
The PI seek function may be used if an RDS station selected from the
memory is poor in receiving condition. Press the preset button again
for the station now tuned in to.
PI Seek: If Best Station Research fails in selecting the best station,
the PI seek function operates to automatically tune in to the
same program.
Region (REG) Switching
Press and hold [AF](REG) for more than 2 seconds in AF mode to alter-
nately select between REG ON and REG OFF.
T A
R E G
A F A F
Note: If you wish to stay with the same program, keep REG ON. In
REG OFF mode, there is a higher possibility of returning to an AF sta-
tion in better receiving condition. The relationship of the PI seek func-
tion with REG ON and REG OFF is as described above.
Changing Display
Press [ • ](DISP/CT) to change the display as follows.
(Frequency display continues for only 3 seconds, returning to PS dis-
play after that.)
3 seconds
Clock Time (CT) System
The CT (24-hour) system may not properly operate in areas where
RDS CT service is not available. Once CT service is received, the CT
system keeps operating. "NO CT" appears on the display in areas where
no CT service is available.
Clock Display
Press [•](DISP/CT) to indicate the clock display.
AF
TAon ST
PS display
d
Frequency display
d
CT display
CQ-MR505/MR303N
E
N
G
L
I
S
H
11
AF
TAon ST
21