Table of Contents
Advertisement
Install an option card into Slot 7
The S500 Series is equipped with a PCIe expansion module that houses four PCIe cards - two full-height and two low-pro-
file cards. The S500 Series also come with three low-profile expansion slots directly on the motherboard. These slots can
be accessed without the removal of the PCIe expansion module.
ALWAYS observe proper electrostatic discharge (ESD) conventions. Attach an ESD protective
wrist strap to your wrist and to the chassis. Ensure that the appliance is on an ESD-safe work sur-
face or ground the unit appropriately. Blue Coat does not assume responsibility or liability for dam-
age resulting from ESD.
1. Unplug the appliance power cords.
2.
Open the appliance center cover.
3.
Remove the appliance rear cover panel.
4. Unlock the PCIe support latch.
5. Remove the PCIe slot cover by lifting straight up from the appliance.
6. Insert the option card by holding the edges of the card and gently inserting into the slot. It might be necessary to
lightly rock the option card into position. Verify that the PCIe card has been fully seated and is aligned with the
chassis.
7. Lock the securing latch. Verify that it is fully closed and that the option card is secured.
27
Advertisement
Table of Contents
