Table of Contents
Advertisement
Install an option card into Slot 5 or 6
The S500 Series is equipped with a PCIe expansion module that houses four PCIe cards - two full-height and two low-pro-
file cards. Slots can only accept low-profile cards.
ALWAYS observe proper electrostatic discharge (ESD) conventions. Attach an ESD protective
wrist strap to your wrist and to the chassis. Ensure that the appliance is on an ESD-safe work sur-
face or ground the unit appropriately. Symantec does not assume responsibility or liability for dam-
age resulting from ESD.
1. Unplug the appliance power cords.
2.
Open the appliance center cover.
3.
Remove the appliance rear cover panel.
4.
Remove the PCIe expansion module
5. Unlock the blue PCIe support latches.
6. Remove the expansion slot cover by pressing the release button and then pulling out the cover from the side. Set
the expansion slot cover aside in a safe location for future use
and flip over the to access the slots.
24
Advertisement
Table of Contents
