Juniper EX Series Quick Start Manual page 2

Related Topics
2
Removing a Power Supply from an EX-series Switch
Grasp the power supply handle and pull firmly to slide it halfway out of the
7.
chassis.
Place one hand under the power supply to support it and slide it completely out
8.
of the chassis. Take care not to touch power supply components, pins, leads, or
solder connections.
Place the power supply in the antistatic bag or on the antistatic mat placed on
9.
a flat, stable surface.
Figure 1: Removing a Power Supply from an EX 3200 or EX 4200 Switch
Installing a Power Supply in an EX 3200 or EX 4200 Switch
Installing and Removing EX 3200 and EX 4200 Switch Hardware Components
Power Supply in EX-series Switches
Field-Replaceable Units in EX 3200 and EX 4200 Switches
AC Power, Connection, and Power Cord Specifications EX 3200 and EX 4200
Switches
Rear Panel of an EX 3200 Switch
Rear Panel of an EX 4200 Switch