Automatic Repeater Shift (Ars) - Yaesu FT-2800M Operatiing Manual

A
DVANCED
[ 2 ] Automatic Repeater Shift
The ARS (Automatic Repeater Shift) feature in this transceiver allows easy and convenient
repeater operation by automatically activating the repeater shift function whenever you tune
to a standard repeater subband. The ARS function is preset at the factory to conform to the
standards for the country to which it is exported.
The ARS function is enabled at the factory. To disable it:
1. Press and hold in the [ MHz ( SET )] key for one second, then rotate the DIAL knob to
select "02 ARS."
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to change the display to "OFF."
3. Press and hold in the [ MHz ( SET )] key for one second to save your new setting and exit
to normal operation.
To enable the ARS function again, select to "ON" in step 2 above.
22
O
PERATION
R
EPEATER
ARS-Repeater Subbands
Version A
145.1 145.5 146.0 146.4
145.6 145.8
European Version
O
PERATION
147.0 147.6
146.6 147.4
FT-2800M O
148.0
M
PERATING ANUAL