Table of Contents
Advertisement
4. Open the DC coupler cable cover, pass the DC coupler cable through the opening, and close the battery/
card cover.
Slide the battery/card cover in the opposite direction of
make sure it is securely closed.
5. Connect the AC plug cord to the AC adapter.
6. Plug the AC plug cord into the power outlet.
Make sure to use only the AC adapter specified for the camera. Damage caused by the use of an incorrect adapter is not
covered under the warranty.
To prevent unexpected auto power off resulting from no battery power remaining during the process of transferring your
images to the computer, use of the optional AC adapter is recommended.
. Slide the battery/card cover all the way in to
EN-19
Advertisement
Table of Contents
