Preparing The Camera - Olympus FE-5050 Quick Start Manual

EN

Preparing the Camera

Inserting the battery and the
SD/SDHC memory card (sold
separately)
Always use SD/SDHC memory cards with this camera.
Do not insert any other types of memory card.
1
FE-5050
2
1 1
Battery/card compartment cover
2
Insert the battery by putting in the
with the C marks toward the battery lock knob. Damage
to the battery exterior (scratches, etc.) may produce heat
or an explosion.
Turn off the camera before opening the battery/card
compartment cover.
When using the camera, be sure to close the battery/
card compartment cover.
Insert the card straight until it clicks into place.
Do not touch the contact area directly.
3
FE-5050
1 1
2
Charging the battery and setting
up using the supplied CD
Connect the camera to the computer to charge the battery and
use the supplied CD for setup.
User registration using the supplied CD and installation
of ib computer software is available on Windows
computers only.
The camera battery can be charged while the camera is
connected to a computer.
2
FE-4050
1 1
Battery lock knob
Write-protect switch
marked side ¿ rst,
FE-4050
1 1
2
Windows
We recommend that you use a computer equipped with
Windows XP (Service Pack 2 or later), Windows Vista, or
Windows 7.
1
Insert the supplied CD in a CD-ROM drive.
Windows XP
A "Setup" dialog will be displayed.
Windows Vista/Windows 7
An Autorun dialog will be displayed. Click "OLYMPUS
Setup" to display the "Setup" dialog.
If the "Setup" dialog is not displayed, select "My
Computer" (Windows XP) or "Computer" (Windows Vista/
Windows 7) from the start menu. Double-click the CD-
ROM (OLYMPUS Setup) icon to open the "OLYMPUS
Setup" window and then double-click "SETUP.EXE".
If a "User Account Control" dialog is displayed, click
"Yes" or "Continue".
2
Follow the on-screen instructions on your computer.
If nothing is displayed on the camera screen even after
connecting the camera to the computer, the battery
may be exhausted. Leave the camera connected to the
computer until the battery has charged, then disconnect
and reconnect the camera.
Connecting the camera
FE-5050 FE-4050
Indicator lamp
Computer (on and running)
When the camera is connected to another device via
USB, a message will be displayed prompting you to
choose a connection type. Select [STORAGE].
3
Register your Olympus product.
Click the "Registration" button and follow the on-screen
instructions.
4
Install the camera manual.
Click the "Camera Instruction Manual" button and follow the
on-screen instructions.
Macintosh
Mac OS X v10.4.11–v10.6
1
Insert the supplied CD in a CD-ROM drive.
Double-click the CD (OLYMPUS Setup) icon on the
desktop.
2
Copy the camera manual.
Click the "Camera Instruction Manual" button to open the
folder containing the camera manuals. Copy the manual for
your language to the computer.
Multi-connector
USB cable (supplied)