Majestic fireplaces NV360 Series Homeowner's Installation And Operating Manual page 25

Remote Controls
Optional remote control units are available to control
different functions of the appliance.
Model Functions Controlled
RC1 ON/OFF
RC2 ON/OFF and Temperature
MRC3 ON/OFF and Temperature control with
a digital display and a programmable
24 hour clock
IMT Wall mounted thermostat control
Ceramic Refractory Lining
1. Remove glass and logs.
2. Insert supports under ceramic hearth panels. (Fig.
35)
3. Remove three (3) screws securing heat shield to
combustion dome. (Fig. 36)
4. Place rear ceramic panel in back of unit. (Fig. 37)
5. Place side panels.
6. Replace heat shield, logs and glass.
Grate
Burner
Fig. 35 Ceramic support.
Section A
H101
Heat Shield
Ceramic Panel Supports
3/16/99 djt
Fig. 36 Heat shield.
H103
heat shield
3/1/99 djt
20003565
Ceramic
Support
H101a
Hearth Panel
Heat Shield
(3)
Screws
Side View
Section A
Rear Ceramic Panel
Burner
Fig. 37 Rear ceramic panel placement.
Decorative Frame Trims H102
rear ceramic support
A selection of decorative frame trim kits are available
2/23/99 djt
for moutning around the outside of the appliance to
enhance its visual effct on the room. Installation instru-
citons for each decorative frame trim are included with
the frame trim kit. Contact your authorized distributor for
details and ordering information.
For use with other than VCMP B-vent (SK-8) pipe. Con-
tact your dealer for information.
The model AK-1 Outside Air Kit is designed to bring
additional combustion air directly from the outside to the
fireplace. Refer to installation instructions provided with
the Outside Air Kit.
H103
NV360/580 Series
Back of
Firebox
Rear Log
Support
B-Vent Adapter
Outside Air Kit
H102
25