Error Indications - Pioneer RMX-1000 Service Manual

5

5.4 ERROR INDICATIONS

When an error is generated, the type of error is indicated with the 7-segment indicator or the SD card LED.
1. Indication with the 7-segment indicator
No. 7-segment indicator
1 [Err] indication
2 [Err] indication
2. Indications with the SD card LED (indications for normal statuses included)
No. SD card LED operation
1 5-time flashing at intervals of
100 msec
2 Continuous flashing at intervals of
200 msec
3 Flashing at intervals of 500 msec
is cyclically performed at intervals
of 2 sec.
4 Flashing at intervals of 250 msec
5 Flashing at intervals of 1 sec
6 Lit
5
6
Meaning
Customized data (.RSD data) damaged
ROM writing error
Meaning
Start of electrostatic recovery process of
X-PAD
Connection error of X-PAD
/DSP initialization error
Sampler data read error
Detection of abnormal voltage
Normal status
An SD card is being identified. When no USB
device is connected, this unit is attempting to
mount an SD card. When a USB device is
connected, the PC is attempting to mount an
SD card or mounting of an SD card has been
completed.
Normal status
This unit has completed mounting of
an SD card.
RMX-1000
6
7
Remarks
The [Err] indication will disappear when the SD card
is unloaded.
This error may be generated when the following
operations are performed:
• Sync is performed in RemixBox.
• The MIDI setting is changed.
Remarks
This state can occur during normal startup.
If this error is generated, the unit can start, but the
SD card drive and X-PAD do not respond.
Key operations are enabled.
The SD card LED flashes twice quickly and
repeatedly after an SD card is loaded.
When this error is generated, all LEDs other than
the SD card LED of this unit are unlit.
They are not lit even dimly.
The unit will not be started.
7
8
A
B
C
D
E
F
31
8