Page 2
A damaged power cord NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to can cause a fire or give you an electrical shock. Check Part 15 of the FCC Rules.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and FEATURES ..............
3. Select the sound range for the effect. indicators BPM COUNTER Press the button of the frequency (LOW, MID, HI) you wish to affect by the beat effect and the corresponding indicator lights. 4. Select the beat with which the effect is to be synchronized.
BPM COUNTER 3. Select the sound range for the effect. Press the button of the frequency (LOW, MID, HI) you wish to affect by the rhythm effect and the corresponding indicator lights. 4. Set to REC mode. ¶ When the REC button is pressed, the BPM display indicates “...
2. Apply the desired effect. Turn the Jog dial either while pressing the lever towards you or pressing it away from you (ON position). As the Jog dial is turned, parameters change gradually and the selected effect is applied. When the dial rotation is stopped, the parameter returns to normal.
Cleaning the unit ÷ Avoid mounting on top of amplifiers, near spotlights, or To clean the unit wipe with a polishing or a soft, dry cloth. other heat-emitting components and appliances; For stubborn dirt, moisten a soft cloth with a weak solution...
BEFORE USE (CONNECTIONS) Basic Connections Before making or changing the connections, switch off the power switch and disconnect the power cord from the AC outlet. ÷ If the DJ mixer supports digital link, it can be connected 1. Connecting the SEND/RETURN Terminals on the...
Page 9
DIGITAL OUT Stereo Amplifier DJ Mixer ¶ Connect the units using a cable with RCA pin plugs. 3. Connecting a DJ CD Player and a DJ Mixer (this ¶ For digital connections, use RCA pin-plug coaxial cables. connection applies effects only to the sound of the DJ CD player on channel 2) ÷...
TAP delay sound. amount of the feedback to be adjusted ÷ Even if the BEAT EFFECTS lever switch ÷ The MIX dial can be used to adjust the (near the [MAX] setting, the sound level is moved from [ON] to [OFF], the levels of the original and pitch echo rises).
Page 11
Causes a phase effect by applying a phase- TAP rhythm (Max 8-TAP). sound to produce more muted sound. shifted sound to the original sound. ÷ The DEPTH dial can be used to adjust the [BPM mode] [BPM mode] amount of shift when the sound is cut.
Jog dial Jog dial ÷ The amount of resonance is changed ÷ The MIX dial can be used to adjust the ÷ The amount of resonance is changed using the DEPTH dial to emphasize the levels of the zip+reverb and original using the DEPTH dial to emphasize the phase effect.
(change cyclic effect) * The effect time display in the rhythm mode shows the total time from the beginning to end of TAP input. For this reason, the noted MIN time may be somewhat different from the effect time display.
Lights steadily with START, and goes out with STOP. digital jog break function (ON/OFF). [MIDI channel setting (CH SET)] If this button is held depressed when MIDI mode is set to 4 MIDI mode select switch [TRANSMIT] or [RECEIVE], the MIDI indicator flashes and Select MIDI communication between computer and other the MIDI setting mode is enabled.
Page 15
10 EFFECT OUT LEV. dial synchronized to the corresponding multiple of the BPM (1/ When effects are set to ON, this dial can be used to control 8, 1/4, 1/2, 3/4, etc.), thus allowing one-touch change of the the effect output level. Adjustment range is –∞ to +6dB.
Page 16
DEPTH dial (see page 13). effect produced when rotating the Jog dial is maintained even if you remove your hand from the dial (when the hold 29 Beat effect MIX dial function is OFF, the effect returns to normal if your hand is Rotate to adjust the mixing balance of original and effect removed from the dial).
EFFECT OUT LEV. SIGNAL FLOW METER MODE BYPASS ¶ When set to the [BEAT] position the foot switch operates to Adjusting Input Level turn beat effects ON/OFF. * Use a commercially available switching-type foot switch with 6.3 mm monaural phone plug.
When pulled toward you to the [ON] position: TAP: BPM is input manually by tapping on the TAP button. The effect is applied only while the lever is pulled to the [ON] ¶ When power is first turned ON, the mode defaults to AUTO.
[OFF]. When pulled toward you to the [ON] position: The effect is applied only while the lever is pulled to the [ON] position; when the lever is released, it returns automatically to the middle [OFF] position.
[OFF]. When pulled toward you to the [ON] position: The effect is applied only while the lever is pulled to the [ON] position; when the lever is released, it returns automatically to the middle [OFF] position.
MIDI (Musical Instrument Digital Interface) is a standard protocol designed to allow exchange of information between electronic instruments and/or computers. A MIDI cable is used to connect two appliances equipped with MIDI connectors, thus allowing data to be exchanged between the two appliances. The EFX-1000 uses MIDI to send and receive operation and BPM data (timing clock).
After touch: By Key ✕ ✕ By Channel ✕ ✕ Pitch Bender: ‡ ‡ 12, 44 Beat select time parameter (MSB, LSB) ‡ ‡ 13, 45 Time parameter (MSB, LSB) ‡ ‡ 16, 48 JOG parameter (MSB, LSB) ‡ ‡...
Page 23
Bn 2c LSB FLANGER, FILTER, PHASER: 5-16000 When 5-16000 are transmitted for FLANGER, FILTER, or PHASER, EFX-1000 internally multiplies value by x2, so as to operate at 10- 32000. * On receive side, search is performed for beginning of effect cycle.
¶ During beat effect, if beat operation mode (rhythm mode) is received, the rhythm effect function is enabled. Thereafter, if the first time rhythm No. 1, time 1, rhythm No. 2, time 2, rhythm No. 3, time 3 are transmitted in that order, the effector continues to operate in response to the received rhythm.
Sometimes the trouble may originate from another component. Thus, also check the other electrical appliances also in use. If the trouble cannot be rectified even after checking the following items, contact your dealer or nearest PIONEER service center.
Page 26
÷ This component may fail to operate properly due effects from static electricity or other causes. In this event, try disconnecting the power cord and reconnecting it. If this doesn’t solve the problem, consult your dealer or nearest...
RCA pin jacks ................. 2 Maximum external dimensions Phone jacks (1/4-inch/6.3 mm in diameter) ........ 2 ............320 (W) x 234 (D) x 101 (H) mm Digital input terminal 12-19/32 (W) x 9-7/32 (D) x 3-31/32 (H) in. RCA pin jack ................... 1 Digital output terminal 2.
Electronic Industries Association’s Consumer Level Example Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that Quiet library, soft whispers lets the sound come through loud and clear without...