Vermont Castings Montpelier Wood Insert MEAD3BS Installation Instructions Manual page 8

2. Attach the left corner trim to the mantel
assembly using one (1) 1/4-20 x 5/8" hex
head bolt and one (1) flat washer. (Fig.
12)
3. Attach the right corner trim to the mantel
assembly using one (1) 1/4-20 x 5/8" hex
head bolt and one (1) flat washer. (Fig.
12)
4. Attach the center trim to the mantel as-
sembly between the left and right ends
using one (1) 1/4-20 x 5/8" hex head bolt
and one (1) flat washer in the center of
the mantel. (Fig. 12)
5. Using four (4) flat washers and four (4)
1/4-20 x 3/8" hex head bolts, attach the
left corner trim and right corner trim to the
center trim. (Fig. 12)
6. Using a straight edge gently placed
against the front edge of the mantel assembly, align
the left, right and center mantels. Tighten all fasten-
ers snugly. Be careful not to over-tighten.
7. Using four (4) flat washers and four (4) 1/4-20 x 3/8"
hex head bolts, attach the trim columns to the left
and right corner trims finger tight only. (Fig. 13)
8. Using the measuring tape, measure between the
columns to assure equal distance within the opening.
First check the distance between columns near the
top of the unit and then at the bottom of the columns.
Adjust accordingly and securely tighten.
8
Figure 12
Left Corner Trim
Center Trim
5/8" Hex Head Bolt
Figure 13
Mantel Assembly
3/8" Hex Head Bolt
Right Corner Trim
Left Trim Column
������
�� ���� �� ������
Right Trim Column
����
3/8" Hex Head
Bolts
�����
���� �������
����
KT663a
KT669
30004451