Viewing Downscan History; Recording Downscan Data; Customize The Image Settings - Lowrance Hook Reveal X Series Operator's Manual

Use the Arrow keys to position the cursor. When you position the
cursor on a DownScan image, the screen pauses, and the cursor
information window is activated. The distance from the vessel to the
cursor is shown in the bottom row of the cursor information
window.
The cursor depth is shown to the left of the cursor position.
To remove the cursor and the cursor elements from the panel, press
the Cursor/Waypoint key.
Goto cursor
You can navigate to a selected position on the image by positioning
the cursor on the panel, then using the Goto cursor option in the
menu.

Viewing DownScan history

You can view DownScan history by panning the image. To pan the
image, press the Cursor/Waypoint key to position the cursor on the
image. This stops automatic scrolling.
• Use the left Arrow key to move the cursor to left edge of the
image. Continue pressing the left Arrow key so the image pans to
the left and the historical image is viewed.
• Use the right Arrow key in the same manner to pan the image
back to the right and display the most current image.
• To resume normal scrolling, press the Cursor/Waypoint key to
remove the cursor from the image.

Recording DownScan data

DownScan data can be recorded by selecting the correct file format
in the record dialog. Refer to "Start recording sonar data" on page 41.

Customize the image settings

By default the unit is set to Auto mode, and most settings are
automated. It is recommended that only experienced sonar users
use the customize settings to further customize the sonar image.
Select Auto in the menu and change to custom mode to customize
image settings.
Additional options are available for the Auto and Custom modes.
Refer to "More options" on page 60.
DownScan | Hook Reveal X Series Operator Manual
57