To adjust Save to or Bytes per Sounding:
1.
Highlight
menu and press EntEr.
2.
Use the keypad to select the desired option and press
To turn on/off Log All Channels:
1.
Highlight
EntEr.
2.
Press
Start Logging
A sonar log is a recording of sonar activity
displayed on the sonar page.
To record a sonar log, highlight the Start
Logging button and press EntEr.
To stop logging:
1.
Select
Logging menu and press
EntEr.
2.
Highlight the
button and press EntEr.
Source
Selects the transducer data that will be shown by a your display unit when there is
more than one StructureScan transducer connected to an ethernet network.
To select a source:
1.
Select
2.
Highlight the desired option and press
Settings
Opens the Sonar Settings menu.
Viewing Structure History
You can view Sidescan or Downscan history individually — by displaying them full
screen — or simultaneously by adding them to a multi-panel screen.
Save to or Bytes per Sounding from the Sounder Logging
Log All Channels on the Log Sonar menu.
Stop from the Sounder
Stop Logging
Source from the Structure menu and press EntEr.
Red circle indicates sonar log is being
recorded; All Channels are being
logged in this example
EntEr.
13
EntEr.