Canon WFT-R10 Advanced User's Manual page 62

5.
Configure the SSH login authentication settings.
Select [User name] and [Password] and enter the user name and
password for SSH password authentication with the displayed virtual
keyboard (
Select [OK] and go to step 9.
6.
Configure the passive mode setting.
This is not displayed if you selected [SFTP] in step 1.
Select [OK] to proceed to the next screen.
If "Error 41: Cannot connect to FTP server" is displayed in step 9,
setting [Passive mode] to [Enable] may resolve the error.
7.
Set the proxy server.
This is not displayed if you selected [FTPS] or [SFTP] in step 1.
Select [OK] to proceed to the next screen.
).
62