Haier HWD120-B14876 User Manual page 27

S1
S2
R1-R4
I1
9-8
Note: Keep in safe place
Keep all parts of the transport protection in a safe place for later use. Whenever the
appliance is to be moved at first reinstall the protection parts.
9.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transport protection
before installation to prevent damage. The assemply takes place in reserve order.
9-9
2. Remove 10screws (R1-R10) from back reinforcement
9-6
(Fig. 9-6) and put aside.
R5-R10
3. Pull out the 2 iron bars I1 and I2 (Fig. 9-7).
9-7
I2
4. Fill the 6 left holes with blanking plugs (Fig. 9-8).
9.5 Adjusting the feet
Install the appliance on solid ground. Adjust all feet
(Fig. 9-9) to achieve a complete level position. This
will minimize vibrations and thus noise during use. It
will also reduce wear and tear. We recommend to use
a spirit level for adjustment. Floor should be as stable
and flat as possible.
9-Installation
27