Pressure Relief Procedure - Graco HVLP Series Operation, Parts

Pressure Relief Procedure

Pressure Relief Procedure
Follow
Procedure whenever you see this
symbol.
The spray gun cup is pressurized. To
reduce the risk of splashing from
pressurized fluid, always follow the
Pressure Relief Procedure before
removing cup.
1. Turn the ON/OFF switch to OFF
position.
Standard Models:
ti30625a
ProContractor and ProComp Models:
10
the Pressure Relief 2. Unplug power cord to disconnect power.
3. Disconnect spray gun from air hose.
If using a FlexLiner System:
4. Disconnect tubing from gun to relieve
pressure in the cup.
ti31188a
ti30757a
ti30627a
3A5085C