Setting The Programme - Siemens WP13T483BY Instruction Manual

Setting the programme

Before switching on the machine, check if the mains lead is connected and the tap is open.
Ensure that the drum and lid are properly closed.
Selecting the laundry type
To select the type of laundry or a specific programme, set
programme selector
section SELECTING THE PROGRAMME.
The machine is switched on by turning the programme
selector to any position other than "Off".
Temperature selection
If you wish, you can change the suggested washing
temperature using button
For a cold wash, set the temperature to "0".
Selecting the spin speed or Rinse Stop
Every programme that is selected recommends an optimal spin
speed.
By briefly pushing pushbutton
- select a different spin speed
- Select Gentle Spin. The programme ends with a Gentle Spin
at 110 rpm
- or select Rinse Stop.
The laundry remains in the final rinse water.
"Spin speed").
Selecting pushbuttons for auxiliary functions
To select auxiliary functions, press one or more auxiliary
function pushbuttons
AUXILIARY FUNCTION PUSHBUTTONS.
sounds if these are not compatible with the selected
programme.
Starting the programme
Start the programme using the "Start/Pause" pushbutton
The Washing indicator lights up.
3
.. or use button to select the DELAYED START or DELAYED
END function. Use the buttons to continue making the settings.
1
to the required programme. See
.
2
7
, you may:
6
. Also see chapter entitled
An audible signal
(see section
.
4
16
Display
The machine displays the
most suitable temperature
and spin speed for the
programme, as well as the
programme duration.
Display
Display
Display
Indicator light(s) for the
selected option(s)
Display