Cleaning; Storage; Disposal - ULTIMATE SPEED UASB 12 A1 Operating Instructions Manual

Cleaning

CAUTION
Possible damage to product!
► Always disconnect the power supply before cleaning.
► Protect the seat cushion
► To avoid irreparable damage to the product, never submerge the seat
cushion
► Do not use chemical cleaners or scouring agents to clean the seat cushion
► Do not hang up the seat cushion
► Do not re-connect the seat cushion
pletely dry.
■ Clean the seat cushion

Storage

■ If the seat cushion
original packaging in a dry place without anything placed on top.
■ Do not place any objects on top the seat cushion
to prevent the seat cushion

Disposal

Disposal of the product
Never dispose of the product in the normal domestic waste
This product is subject to the provisions of European Directive
2012/19/EU WEEE (Waste Electrical and Electronic Equipment).
Dispose of the product through an approved disposal centre or at your community
waste facility. Please observe the currently applicable regulations.
Please contact your waste disposal centre should you be in any doubt.
UASB 12 A1
from moisture and liquid penetration.
in water.
with a lightly moistened cloth and a mild detergent.
is not going to be used for a long period, keep in the
from being sharply kinked.
to dry using clothes pegs or similar.
to the power supply until it is com-
during storage in order
GB
IE
.
9