Specifications - Standard Horizon RAM4X Owner's Manual

STROBE LED
When the [STROBE] soft key is pressed, the Strobe LED will light or flash repeatedly.
When the RAM4X comes in contact with water, the Strobe LED will light or flash to as-
sist in locating the RAM4X in low light conditions.
[ ]  "SETUP"  "CONFIGURATION"  "STROBE LED"
1.
(RAM4X)
2. Rotate the DIAL/ENT knob to select the desired setting
from: "CONTONIOUS" (default setting), "SOS", "BLINK
1", "BLINK 2", or "BLINK 3".
3. Press the [ENTER] soft key to store the selected setting.
4. Press the CLEAR/
5. When the [STROBE] soft key is pressed, the Strobe
LED will light or flash repeatedly.
SPEAKER SELECT
This menu item is not available for RAM4X.

Specifications

Supply Voltage:
Current Consumption:
Operating Temperature:
Wireless Networking Module:
Frequency Band:
Wireless Networking Standard:
RF Output:
AF Output:
Display Size:
Display Resolution:
Dimensions (W x H x D):
Weight (Approx):
Symbol placed on the equipment
Direct Current
10
key to return to radio operation.
3.7 VDC
100 mA @AF Mute / 450 mA @VOL Max.
–4°F to +140°F (–20°C to +60°C)
FCC ID: K660A290910, IC: 511B-0A290910
2412 to 2462 MHz
IEEE 802.11 b/g/n
0.09 W
700 mW @ 8 ohms for 10% THD
1.8" x 0.9" (45 mm x 23 mm)
222 x 162 dots
2.5" x 5.3" x 1.3" (63 mm x 135 mm x 32.5 mm)
7.76 oz (220 g) (with Belt Clip)