US Robotics Instant802 APSDK Administrator's Manual page 286

Possible Solution 2:
Ensure that the wireless device is set to
the access point:
• SSID, also called Network
• Kind of security (for example, WPA)
• Security key value
• 802.11 mode
If you change the settings on the access point, remember to change the settings on your wireless devices
also.
Possible Solution 3:
Ensure that the access point is broadcasting its SSID:
1. Open the Web User Interface of the access point.
Advanced menu, select Security.
2. From the
3. Verify that Broadcast SSID
Update
4. Click to save any change.
Possible Solution 4:
If you use MAC filtering on the access point, verify that the MAC address of the client is allowed to access
your wireless network:
1. Open the Web User Interface of the access point.
Advanced
2. From the menu, select
3. If you selected Allow only stations in
List.
If you selected Allow any station unless in
Stations List.
Possible Solution 5:
Reboot the access point by disconnecting and then reconnecting its power adapter.
Infrastructure
mode and has the following settings in common with
Name.
is set to Allow.
MAC Filtering.
list, verify that the client's MAC address is included in the Stations
list, verify that the client's MAC address is not included in the
Professional Access Point
Administrator Guide
Installation and Connectivity Troubleshooting - 286