US Robotics Instant802 APSDK Administrator's Manual page 199

Remove a User Account
To remove a user account, type the following
USR5453-AP# remove radius-user wally
Use the "get" command to view all user names. (You can see "wally" has been removed.)
USR5453-AP# get radius-user all name
name
--------
larry
samantha
endora
darren
Status
The command tasks and examples in this section show status information on access points. These
settings correspond to what is shown on the Status tabs in the Web User Interface.
This table provides a quick view of all Status commands and links to detailed examples.
Make sure you are familiar with the names of the interfaces as described in
as Presented in the CLI" on page
mines whether the command output shows a wired or wireless interface or the Internal or Guest net-
work.
This table shows a quick view of Status commands and provides links to detailed examples
Status Command
Understanding Interfaces as Presented in
the CLI
Global command to get all detail on a
Basic Service Set (BSS).
This is a useful command to use to get a
comprehensive understanding of how the
access point is currently configured.
Get Common Information on the Internal
Interface for the Access Point
Get All Wired Settings for the Wired Inter-
nal Interface
Get Current Settings for the Ethernet
(Wired) Guest Interface
Get the MAC Address for the Wired Inter-
nal Interface
190. The interface name you reference in a
Example
Reference of interface names and purposes as described in
standing Interfaces as Presented in the CLI" on page
get bss all detail
get interface br0
get interface br0
get interface brguest
get interface brguest mac
get interface brguest ssid
get interface wlan0 mac
Class Structure, Commands, and Examples - 199
Professional Access Point
Administrator Guide
("Status" on page 77)
"Understanding Interfaces
get command deter-
"Under-
190.