Page 2
Note: You only need to install this software on the PC or laptop that was originally connected to your modem, bridge, router, or hub. If your CD-ROM does not automatically launch, click Windows Start, Note: Run, and type D:\setup (or the appropriate letter of your CD-ROM drive) and click OK.
Page 3
Note: Each Wireless Access PC Card or PCI Adapter in the wireless network must have the Infrastructure mode selected within the Configuration Utility. If you are using a U.S Robotics Wireless Access PC Card or PCI Adapter, the Configuration Utility will look like the graphic below.
Page 7
My computer does not recognize the Wireless Access Point after I changed the settings. I am unable to communicate with the Wireless Access Point. I am unable to enter the Wireless Access Point Web Configurator.
Page 8
My Wireless Access Point is not appearing in the list when I scan for it. My computer is not acknowledging my Wireless Access Point. I am experiencing poor link quality in some areas of my home or office.