Related Manuals for Neilsen CT1731
Summary of Contents for Neilsen CT1731
- Page 1 BILGE PUMP CT1731 CT1732 CT1733 ORIGINAL INSTRUCTIONS SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE. Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
-
Page 3: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: BILGE PUMP Model: CT1731 CT1732 CT1733 Applicable EC Directives: EC Low Voltage Directive 2014/35/EU EC Directive of Electromagnetic Compatibility 2014/30/EU... - Page 4 INSTRUCTIONS 1. Remove the strainer from the bottom of the pump by depressing the lock tabs on both sides of the pump. CAUTION: Strainer must be properly installed before attaching and running the pump to prevent any foreign material from entering and damaging pump components. 2.
-
Page 5: Winter Storage
10. Follow one of the two wiring diagrams: • Wiring for manual operation: The Manual system is the simplest wiring design, but it only provides ON-OFF control of the pump. Consequently, pumps are often left on longer than necessary. • Wiring for automatic operation: The automatic system incorporates the Bilge Pump Float Switch and ensures that... -
Page 6: Troubleshooting
Replace screen. Pump stops 1. Water temperature too high. 1. Do not exceed temperatures above often. 77° F. TECHNICAL DATA Model CT1731 CT1732 CT1733 Open Flow Rating 1000 GPH 2000 GPH 2000 GPH Power Source 12 Volts 12 Volts... - Page 8 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...