Using The Master Power Key; To Program The Master Power Key; To Operate The Master Power Key - Universal Remote Control Atlas M1055 User Manual

Atlas DVR-PVR M1055

USING THE MASTER POWER KEY

The Atlas DVR/PVR 5-Device Universal Remote Control
has a unique feature that allows you to sequentially turn
on or off up to five of your home entertainment devices
with a single key press.
NOTE: MASTER POWER ( PWR ) only works in the CBL mode. If it
is not programmed, only the cable converter will turn on or off.
In any other mode, pressing MASTER POWER ( PWR ) once will
turn on or off the selected device.

To Program The Master Power Key:

1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice,
then release SETUP.
Enter 9 - 9 - 5. The last-selected device key
2.
will blink twice. Then press PWR once.
3. For the first device you want in the power on
sequence, press a device key (e.g., CBL) once .
Then press PWR once.
4. Repeat step 3 up to four more times to add the
second,third,fourth,and fifth device,as desired.
5. To save the settings and exit the program, press
and hold CBL once. Next press and hold
SETUP until the CBL key blinks twice, then
release SETUP.

To Operate The Master Power Key:

1. After programming, point the remote control
at the devices. Press CBL once.
2. Press PWR once to sequentially turn on or off
all home entertainment devices.
3. You will see the devices turn on or off
according to the programmed sequence.
8/12/04 4:51 PM Page 18
18