Installing Batteries - Universal Electronics Atlas ATLAS OCAP 5-Device User Manual

Device Key

INSTALLING BATTERIES

1. On the back of the remote control, push the
tab and lift off the battery cover.
2. Locate the two (2) enclosed AA batteries.
Match the + and - marks with those in the
battery case, then insert them.
3. Align the covers keys with the cases holes and
press the cover back into place. The tab should
click when the cover is locked.
4. Test the remote control by pressing any mode
key (e.g., TV). If the batteries are inserted
correctly, the LED (red light) will blink once.
NOTE: When batteries need replacement, the remote
control will cease to operate. Replace the
batteries and the unit will be restored to its
full functionality, complete with your favorite
settings.
Controls these types of devices
Television
Cable Box (Converter) or Satellite
Receiver
www.urcsupport.com/atlasocap
❶
❷
❸
9