Cisco Webex Room Panorama Installation Manual page 77

27.2 Tilt the content screen back in place
Pull the content screen slightly outward, so that
you can release the levers on both sides.
Then, gently let the screen move into vertical
position.
You may need to adjust the height of the
content screen to align with the speaker grille.
If so, adjust the thumb screws at the top of the
screen, as explained in step 24.3.
×2
27.3 Insert the deco ring
Place the deco ring around the camera. The ring
provides a neat transition between the grill and
camera.
75