Connect Cables - Cisco Webex Room Panorama Installation Manual

13

Connect cables

Wiring diagram
C - in the document bag
Now you need the wiring diagram that was
shipped with the product.
Cisco Webex Room Panorama
S9
Wiring diagram
S6
Content screen
(CS-PANO-MON65)
S3
Loudspeakers Camera Loudspeakers
(CS-PANO-SPKR+) (CS-RPQUADCAM+) (CS-PANO-SPKR+)
S1 S2 S3 S4 S5 S6 S7 S8 S9
C2 C1 C3 C4
ONE CONNECT
ONE CONNECT ONE CONNECT
Left screen S10
(CS-PANO-MON82+) (CS-PANO-MON82+)
POWER POWER
S7 S7 S8
IN RS232C AUDIO OUT DIGITAL LAN HDMI IN ONE CONNECT RS232C IN
(OPTICAL) HDMI 1 HDMI 2 HDMI 3 (ARC) HDMI 4
One Connect S4 S1
(CS-1CONNECT-BOX-)
12 V PSU
D5 D5 D3
(PSU-12VDC-120W-) D3 C4 A1 A2
Fan kit
(CS-PANO-FANKIT+)
Amplifier
D2 D1 (CS-PANO-DNAM4+)
24 V PSU
D4 D4 D2
(PSU-24VDC-270W-)
STAT SYST
Wi-Fi/Bluetooth antenna PoE SPEED
MODE STACK
Wi-Fi antenna
CONSOLE
Cisco Catalyst 3560CX-12PC-S
(CS-PANO-ANT+) (placed in the system)
M1..8 Codec D1
SB1 SB2 (CS-CODEC-PRO++)
P2
S1 S2 S3 C1 C2 T1..3 P1 C3 X1 X3
Subwoofers (CS-PANO-BASS+)
T4..5 X1
SYST STAT
SPEED PoE 1 3 5 7 9 11 13 14
MODE STACK 1 2 X2
2 4 6 10 8 12
CONSOLE POWER over ETHERNET 240W SFP+
... Cisco Catalyst 3560CX-12PC-S
... (placed by the table)
Microphones Presentation sources Touch panels (user interface)
The wiring diagram is also available online, at
https://www.cisco.com/go/panorama-installation
Cable marking
The cables are marked as shown in the wiring
diagram. They have a colored tag for identification,
and a symbol that match the symbol you find
on the connector panel that the cable shall be
connected to.
This is the unique identifier
C1
for the cable.
1
This is the same symbol that is used on the
connector panel of the device.
28
Cable marking - example:
This pair of labels is used on one of the HDMI
cables between the codec and the camera.
Power
Ethernet
HDMI
Audio
Other
Label Part number
S10 S11 S12 C1 72-101528-xx
C2 72-101528-xx
S1 72-101334-xx
S2 72-101007-xx
S3 72-101007-xx
ONE CONNECT
T1..3 72-101342-xx
S9
C3 72-101204-xx
Right screen
S11 D1 72-101204-xx
S4 72-101042-xx
72-101042-xx
S8 S5
S6 72-101042-xx
DIGITAL AUDIO OUT LAN HDMI IN ONE CONNECT
(OPTICAL) HDMI 1 HDMI 2 (ARC) HDMI 3 HDMI 4 P1 72-101005-xx
S5 S2 One Connect
X1 72-101005-xx
(CS-1CONNECT-BOX-)
X3 72-101204-xx
72-100706-xx or
T4..5 72-100707-xx
A1 72-101817-xx
A2 72-101818-xx
microphones
M1..8
(no lable on cable)
34-100356-xx
D2
(PSU)
34-100355-xx
D3
S4 S5 S6 (PSU)
C4 72-101811-xx
1 3 5 7 9 11 13 14 C13 - 2 m
1 2 X4 X4 D4
2 4 6 8 10 12 (region specific)
POWER over ETHERNET 240W SFP+
C13 - 2 m
X3 D5
(region specific)
SB3 SB4 S7 C13 - 2 m
(region specific)
P2
C13 - 2 m
S8
(region specific)
C7 - 4.5 m
S9 (region specific)
C13 - 5 m
P2
(region specific)
C15 - 2.5 m
X2
(region specific)
Subwoofers (CS-PANO-BASS+) C15 - 2.5 m
X4 (region specific)
P1
One Connect
S10 cable
(no lable on cable)
OneConnect
S11 cable
(no lable on cable)
X2
78-101581-01B0
© 2020 Cisco Systems, Inc.
All rights reserved.
Camera connector panel
C1
1
C1
1
Codec connector panel
Cable guiding
For some cables, only one end can be connected
at this point in the installation. In those cases,
leave the other end hanging in front of the system
or place it on top of the cavities for later use.
The main path for cables is on top of the cavities.
Organize cables neatly using velcro straps
We strongly recommend that you fasten the
cables to the steel structure with velcro straps.
Both to avoid strain on the cables and connectors
and for a neat and tidy look. Also see step 14.
You find velcro straps in box
A6
Do not connect to power!
Do not connect any power cords to the socket
outlets at this point in the installation.
them to the power cavity, where they will be
connected later.
.
Only guide