Cisco Webex Room Panorama Installation Manual page 72

25.7 Connect the One Connect cable
Repeat the procedure for both screens.
1. Thread the cable between the screen and the
rod that is closest to the connector.
Side view, cross section
70
2. Connect the cable to the screen according to
the wiring diagram:
Left screen:
• 1x One Connect cable (S10)
Right screen:
• 1x One Connect cable (S11)
Take care not to bend the cable too much; it's
fragile.
3. Strap the cable to the wall mount structure.
Allow for moving the screen up and down
without straining or pinching the cable.
4. Fasten the cable connector to the screen with
a screw.
The screw is in the bag of accessories that
was in the screen package.