Cisco Webex Room Panorama Installation Manual page 61

23
Mount the loudspeakers
There are six loudspeakers on each side. They are
inserted in a mounting structure that is fastened to
the risers.
Loudspeakers
2x
Speaker mounting structure (left and right)
12x
Loudspeaker C10
1x
Screen support profile A1
10x
(M6x12, Torx 30)
23.1 Mount the loudspeaker mounting structure
Repeat this procedure for both sides.
1. Enter a screw
plate as shown, without tightening.
A10
into the mounting
(M6x12, Torx 30)
Don't tighten the
screw so much that
it becomes difficult
to hang the mounting
structure on it.
2. Hang the mounting structure onto the screw.
The left and right mounting structures are not
equal; check that you mount it on the correct
side. The illustration shows the left structure.
The largest hole is
toward center
A small bracket
is out to the side
3. Add two more screws
(M6x12, Torx 30)
tighten the first screw.
. Also
59