Wiring Diagram - Dyna-Glo Delux RMC-FA150NGDGD Operating Instructions & Parts Manual

Dyna-Glo Delux Operating Instructions and Parts Manual
Dyna-Glo
Construction Heater
Wiring Diagrams
Figure 6 – Wiring Diagram
• Ensure that the flow of combustion and ventilation air exchange cannot become obstructed.
• As the building 'tightens up' during the construction phases ventilation may need to be increased.
For Technical Support or Troubleshooting, Call: 1-877-447-4768, 8:30 am - 4:30 pm CST
Delux Natural Gas
®
Yellow
Gas
Valve
White
Back
Pressure
Switch
Blue
Motor
White
Thermostat
on / off
Black
Green
Line Cord
If any original wiring as supplied with the heater must be
replaced, it must be replaced with type AWG105°C wire or its
equivalent except as indicated (*Type SF2-200, **SGI-250°C)
High Limit
Switch
Black
White
Yellow
Green
Ground
6
RMC-FA150NGDGD
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
Spark Plug
Line
Neut
Valve
Ground
PCB Assembly
www.ghpgroupinc.com