TP-Link TL-WR820N User Manual page 76
300mbps
Hide thumbs
Also See for TL-WR820N:
- Quick start manual ,
- Manual (5 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
Chapter 5
•
IP Address
- Enter the IP address in dotted-decimal notation provided by your ISP.
•
Subnet Mask
- Enter the subnet mask in dotted-decimal notation provided by your
ISP. Normally 255.255.255.0 is used as the subnet mask.
•
Default Gateway
- Enter the gateway IP address in dotted-decimal notation provided
by your ISP.
•
Primary/Secondary DNS
decimal notation provided by your ISP.
•
MTU Size
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
PPPoE
If your ISP provides PPPoE connection, select PPPoE.
- (Optional) Enter one or two DNS addresses in dotted-
Configure the Router in WISP Mode
71
Hide quick links:
Advertisement
Table of Contents
