Wireless; Wireless Settings - TP-Link TL-WR820N User Manual

Chapter 4
router's IP which sends out data. In the example, the data packets will be sent to
the LAN port of Router B and then to the Server, so the default gateway should
be 192.168.0.2.
• Interface: Determined by the port (WAN/LAN) that sends out data packets. In
the example, the data are sent to the gateway through the LAN port of Router
A, so LAN should be selected.
• Description:
5 Click SAVE.
6 Check the Routing Table
is set successfully.
4 3

Wireless

4 3 1

Wireless Settings

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
3. Configure the wireless settings for the wireless network and click SAVE.
• 2.4GHz - Select this checkbox to enable the 2.4GHz wireless network.
• Network Name (SSID)
must be assigned to all wireless devices in your network.
• Hide SSID - Select this checkbox if you want to hide the 2.4GHz network name (SSID)
from the Wi-Fi network list. In this case, you need to manually join the network.
Enter a description for this static routing entry.
below. If you can find the entry you've set, the static routing
Wireless > Wireless
- Enter a value of up to 32 characters. The same Name (SSID)
Configure the Router in Wireless Router Mode
Settings.
32