Selecting The Call Tone; Roger Beep - Uniden UH400SX Owner's Manual

UNIDEN Model UH400SX, UH400SX-RM, UH500SX, UH500SX-RM OM
Operation

Selecting the Call tone

[MENU/ENTER]
1. Press
The call tone setting fl ashes.
2. Turn the Rotary Channel Selector at
the base or press
Remote SPK/MIC to change the
setting between 1, 2, 3, 4 and 5.
[MENU/ENTER]
3. Press
4. Press and hold
from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will automatically
exit the Menu Mode.

Roger Beep

[MENU/ENTER]
1. Press
The roger beep setting fl ashes.
2. Turn the Rotary Channel Selector
at the base or press
Remote SPK/MIC to change the
setting between ON or OFF.
[MENU/ENTER]
3. Press
setting.
4. Press and hold
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will automatically
exit the Menu Mode.
uh400sx, uh500sx, uh400sx-RM, uhSec1:26 Sec1:26 uh400sx, uh500sx, uh400sx-RM, uhSec1:26 Sec1:26
four times.
on the
to store the setting.
[MENU/ENTER]
to exit
six times.
on the
to store the
[MENU/ENTER]
to
26
1/2/08 1:31:28 PM 1/2/08 1:31:28 PM